Description
Tektronix TDS3014B Digital Phosphor Oscilloscope
The Tektronix Digital Phosphor Oscilloscope TDS3014B is capable of storing and analyzing three measurements of signal data continuously: amplitude, time and distribution of amplitude.
The TDS3014B has WaveAlert, a Waveform Anomaly Detection which is useful on problem-solving tasks by helping the user discover subtle issues quicker. WaveAlert screens the incoming signals on all channels and will identify any waveform that veers off from the ordinary waveform that is acquired. Since the oscilloscope TDS3014B can stop acquisition, emit a beeping noise, make a printout, or save the waveform when it distinguishes a peculiarity, it can run tests on long periods of time, even unattended, to discover those very uncommon testing failures.
This model also includes an e*Scope Web-based Remote Control. e*Scope allows the user to control their TDS3014B oscilloscope from anyplace, utilizing the Internet or a PC. The TDS3014B oscilloscope can be linked to LAN by means of the Ethernet port. Simply open a program window on your PC and enter the TDS3014B oscilloscope's IP address in the Address window. The oscilloscope will react, enabling you to control it from your program. Download e*Scope control programming to your PC for a graphical interface that shows the TDS3014B oscilloscope screen and front board controls for simple access.
This model has a data transfer capacity of 100 MHz, a Test Rate on each channel of 1.25 GS/s, 20 MHz of BW Limit, and 4 ns to 10 s/div of Time Base Range.
The manual for this model is available on the ApexWaves.com website.
Technical Specifications
| TDS3014B | Technical Specifications & Electrical Characteristics |
|---|---|
| Bandwidth | 100 MHz |
| Channels | 4 Channels |
| Sample Rates | 1.25GS/s |
| Maximum Record Length | 10K Points |
| Vertical Resolution | 9-Bit |
| Vertical Sensitivity | 1 mV – 10 V on all models |
| Vertical Accuracy | ±2% on all models |
| Max input voltage (1 MΩ) | 150 VRMS CAT I on all models (300 V CAT II with standard 10X probe) |
| Position Range | ± 5 div on all models |
| BW Limit | 20 MHz |
| Input Coupling | AC, DC, GND |
| Input Impedance Selections | 1 MΩ in parallel with 13 pF or 50 Ω |
| Time Base Range | 4 ns – 10 s/div |
| Display (VGA) | Color Active Matrix LCD |
