Description
Item #: S332E
Manufacturer: Anritsu
Series: Site Master
S332E by Anritsu is a Cable and Antenna Analyzer in the Site Master series. S332E features a Battery Life of 3.5 hours and a Weight of 8.2 lbs.
The Anritsu S332E Site Master Cable and Antenna Analyzer with a Spectrum Analyzer is designed for cable and antenna installation and upkeep for contractors, wireless service providers, military, aerospace and defense, and public safety fields. This Site Master can perform interference analysis on land mobile radio systems, Wi-Fi, and cell systems. This model has a typical sweep speed of 1 ms per data point, a dynamic range >95 dB in 10 Hz RBW, phase noise of -100 dBc/Hz max @ 10 kHz offset at 1 GHz, and a 4.5 hour battery life. The S332E also has the capability for a single or dual measurement touchscreen and a night time display option.
The Anritsu S332E Site Master comes equipped with easyTest Tools software, which enables advanced users to generate, provide, and show on-screen work instructions for cable and antenna testers. This makes the work easier for cable and antenna sweepers who do not have as much experience. A few of the benefits are: repeatable outcomes, more precise assessments, and not as much rework. Another useful feature of the S332E is that every connector is on the top panel, so the sides are free for handheld use.
Problematic cables, corroded connectors, antennas, lightning strikes, and wet cables are the main cause of problems at a cell site. These issues can result in dropped calls. However, the Anritsu S332E FDR return loss and DTF measurements can uncover an antenna issue from the ground in mere seconds, allowing the Site Master to discover tiny issues before they are large, costly errors.
Specifications
| Frequency Range | 9 kHz to 4 GHz |
|---|---|
| Sweep Time | 50 µs to 50 ms |
| Display | 8.4 in. daylight viewable |
| Battery Life | 3.5 hours |
| Weight | 8.2 lbs. |
| RF Connector | N female |
| Dimensions | 10.7 x 7.8 x 3.6 in. |
| Option 21 | 2-Port Transmission Measurement |
| Option 20 | Bias-Tee |
| Option 19 | High-Accuracy Power Meter (requires External Power Sensor) |
| Option 29 | Power Meter |
| Option 25 | Interference Analyzer (recommend Option 31) |
| Option 27 | Channel Scanner |
| Option 28 | C/W Signal Generator (requires CW Signal Generator Kit, P/N 69793) |
| Option 31 | GPS Receiver (requires Antenna) |
| Option 90 | Gated Sweep |
| Option 413 | Ethernet Connectivity |
| Option 431 | Coverage Mapping (requires Option 31) |
| Option 444 | EMF Measurements (requires Anritsu Isotropic Antenna) |
| Option 509 | AM/FM/PM Analyzer |
| Option 752 | CPRI LTE RF Measurements (requires Option 759) |
| Option 753 | OBSAI LTE RF Measurements (requires Option 759) |
| Option 759 | RF over Fiber hardware (requires Option 752 or 753) |
| Option 98 | Standard Calibration (ANSI 2540-1-1994) |
| Option 99 | Premium Calibration to Z540 plus test data |
