ML2438A

Description

Anritsu ML2438A Power Meter

The ML2438A Power Meter can be worked from either AC line control, outside DC control, or from the optional inner battery. The ML2438A Power Meter is proposed as an Installation (Overvoltage) Category II, Insulation Category I gadget. At control on, the power meter will play out a short power-on self-test (POST). In the event that a POST mistake happens, data and accessible alternatives are shown on the screen. If the POST is effective, the instrument loads the last utilized configuration. In this model, the sensors are encased in a polycarbonate case to help counteract harm. The sensor connectors are uncovered and are a basic piece of the microwave instrument.

The ML2438A Power Meter can be worked utilizing the optional inside battery pack. Amid battery operation, a symbol is shown on estimation screens demonstrating the condition of charge. At the point when the rest of the limit falls below 10%, the symbol will streak, demonstrating that charging will soon be required. Because of energy utilization contemplations, GPIB and serial remote operation are not accessible when the control meter is running from the battery.

The ML2438A Power Meter AC and DC input lines are ensured by inside mounted fuses. These fuses should be changed by qualified administration staff. This model must be legitimately grounded. Inability to ground the instrument could be risky to working staff. This instrument is intended to work inside the temperature scope of 0 to 50 °C (32 to 122 °F) with a maximum humidity of 90 % at 40 °C (104 °F), non-condensing. Full accuracy is indicated at 5 to 35 °C (23 to 95 °F).

Technical Specifications