TDS340A – Tektronix

The TDS340A Digital Real-Time Oscilloscope is created by Tektronix. The TDS340A has a sample rate of 500 Ms/s on every channel and a record length of 1000 sample points for every channel.

Product Description

Item #: TDS340A

Manufacturer: Tektronix
Series: TDS300

TDS340A by Tektronix is a Digital Real-Time Oscilloscope in the TDS300 series. TDS340A features 2 Channels and a Bandwidth of 100 MHz.

The TDS340A Digital Real-Time Oscilloscope manufactured by Tektronix has two input channels, an analog bandwidth of 100 MHz, a sample rate of 500 MS/s, a record length of 1,000 samples, and 8-bit vertical resolution. This model has many beneficial features, including 21 automatic measurements, FFT analysis, a built-in 3.5 inch floppy disk drive, and AutoSetup. This oscilloscope obtains adequate samples to show waveforms precisely at their complete bandwidth.

The Tektronix TDS340A has various display modes: Vector, Vector Accumulate, Dot, and Dot Accumulate. The Accumulate display modes collect numerous waveforms for a user-defined time, anywhere from 500 ms to infinity, then the screen is wiped clean. Vector Accumulate mode utilizes bright vectors to superimpose the present acquisition over the gathered waveforms. These modes are helpful when performing worst case assessments or signal monitoring. Monitoring over a long period of time can be done easily by designating the delete time to infinity.

The TDS340A Digital Real-Time Oscilloscope can sample at five times its bandwidth, which guarantees users of precise real-time acquisition to the complete bandwidth of the oscilloscope, even for single-shot occasions. Typically, two samples for each period is required for a DSO to gather an accurate signal. Therefore, the Tektronix TDS340A is more than adequate. Not only does this oscilloscope’s high sample rate reduce the possibility of aliasing, but it also delivers a higher resolution waveform.

This model comes equipped with WaveStar Software, which a Windows 3.1 application that permits the user to swiftly make an electronic lab notebook within their PC. WaveStar Software allows engineers, technicians, or scientists to record measurements, relevant notes, scope settings, and screen shots that are made with any TDS300 Series, Option 14 DSO.

Specifications


Manufacturer Tektronix
Part Number TDS340A
Series TDS300
Type Digital Real-Time Oscilloscope
Channels 2
Bandwidth 100 MHz
Sample Rate 500 MS/s on every channel
Record Length 1000 sample points for every channel
Dimensions 14.3 x 7.5 x 22.2 in. (with handle, pouch, and front cover)
Weight 15.5 lbs.
Option 14 I/O Interfaces (GPIB, RS-232, and Centronics interfaces, VGA video output, and power for the Option 3P printer)
Option A1 Universal European power cord- 220 V, 50 Hz
Option A2 UK power cord- 240 V, 50 Hz
Option A3 Australian power cord- 240 V, 50 Hz
Option A4 North American power cord- 240 V, 60 Hz
Option A5 Switzerland power cord- 220 V, 50 Hz
Option 1K K212 Scope Cart
Option 3P Thermal Printer (includes Option 14)
Option 9C Certificate of Calibration and Test Data Report