69367B

Description

Anritsu 69367B Signal Generator

Amid an ordinary task, the Anritsu 69367B Signal Generator produces error messages to show inward malfunctions, anomalous instrument activities, or invalid signal sources of information sections. Outside Wide M Mode, sensitivity alignment is accomplished by changing the FM Variable Gain Control DAC to diminish the bearer level as low as conceivable at frequencies of 5 GHz and 20 GHz. The adjusting signal information is from the outside Function Generator.

The FM Rear Panel Input Gain included in this model is adjusted to balance the Locked and Unlocked Narrow FM Mode Sensitivity acquired when a similar outside regulating signal is connected to the front board or back board FM input.  The Anritsu 69367B also offers a Set up Function Generator for a 99.8 kHz sine wave with an output level of 0.707 volts RMS (2-volt crest to top), so the user can utilize a recurrence counter to confirm the output recurrence of their capacity generator is set to 1%.

The 69367B Signal Generator offers a Sweep/Signal Generator between 0.01 to 26.5 GHz, accuracy similar to the instrument time-base, a pulse modulation on/off ratio superior to 80 dB, a rise/fall time of Ë‚10 ns (Ë‚5 ns typical), a minimum levelled pulse width of Ë‚100 ns, a minimum unleveled pulse width of Ë‚10 ns, a pulse overshoot of Ë‚10%, and a level accuracy relative to CW of +/- 0.5 dB.

If you are interested in this model and you want to learn more about its options, features, and specifications, you can check its manual, which is available on the ApexWaves.com website.

Technical Specifications